ABLE
 
1.5/2.0 Able Locking Plate System(ALPS)
Specification of 1.5/2.0 Able Locking Recon Plate(ALRP) & Able Locking Straight Plate(ALSP)
Unit : mm
Type Product Name Width Thickness Screw
Recon 1.5/2.0 ALRP(5.0x2.0T) 5.0 2.0 Ø 1.5/2.0 Cortical,
Ø 1.5/2.0 Locking,
Ø 2.0 Plug
1.5/2.0 ALRP(6.0x2.5T) 6.0 2.5
1.5/2.0 ALRP(6.5x3.0T) 6.5 3.0
Straight 1.5/2.0 ALSP(4.5x1.5T) 4.5 1.5
1.5/2.0 ALSP(5.0x2.0T) 5.0 2.0
1.5/2.0 ALSP(5.5x2.5T) 5.5 2.5
1.5/2.0 ALSP(6.0x3.0T) 6.0 3.0
Specification of 1.5/2.0 ALPS  Screw & Drill Bit
Unit : mm
Category Cortical Locking
1.5 2.0 1.5 2.0
Thread Dia. 1.5 2.0 1.5 2.0
Screw Length 6 / 8 / 10 / 12 / 14 / 16 / 18 / 20 / 22 / 24 6 / 7 / 8 / 9 / 10 / 11 / 12 / 14 / 16 / 18 / 20 / 22 / 24
Drill Bit Dia. 1.1 1.5 1.1 1.5
Driver Type T4 Star
Plate can use 1.5/2.0 ALPS Cortical & Locking Screw
1.5/2.0 Cortical & Locking Screw (4 types) can be used on the plate.
Cutting and bending of 1.5/2.0 ALPS Plate
The plate can be cutting and bending according to the usage environment.
[ [Repeated and excessive bending causes plate fracture. ]
1. Cutting
For the Recon Plate, combine the thread of bending device with the left and right holes of the cutting part, and then twist it to cut.
For the Straight Plate (2T or less), cut both sides of the hole to be cut.
For the Straight Plate (2T or more), fix the cutting part on the cutter, and then twist it to cut.
2. Horizontal Bending
For the Recon Plate, bending within 5º between holes
For the Straight Plate, bending within 3º between holes
3. Vertical Bending
For the Recon Plate, bending within 5º between holes
For the Straight Plate, bending within 3º between holes
4. Twist bending
For the Recon Plate, bending within 5º between holes
For the Straight Plate, bending within 5º between holes
1.5/2.0 ALPS  Locking Plug
It improves bending strength of the plate, and makes using simple fixation with Bone holding forceps and K-wire.
Increasing strength when placing the hole on fracture line.
Easy to fix forceps
Simple fixation with Ø1.0mm K-wire
Method to use 1.5/2.0 Drill ALPS  Guide & Drill Bit Stopper
It is possible to cut the bone by adjusting the bone cutting depth.
1. Checking the perforating depth (bone diameter)
2. Drill Bit Stopper Assembly
3. Checking the protrusion length of the drill bit
4. Drilling
1.5/2.0 ALPS  Depth Gauge
The damaged pin can be replaced.
Medical biocompatible materials
It is produced using the approved Biomedical Stainless Steel & Titanium Alloy Alloys.